Armoloq TPA-857B
*Base Package includes the TPA protective mounting platform only. All additional accessories, components and RF packages are sold as an optional add on or can be purchased separately under the Optional Packages and Components page.
Base package includes the following-
TPA-857B, protective mounting platform
M4-0.7 x 10mm- 4, these mounting screws are the proper length for attaching the TPA to the radio. Not to be used without the TPA pack frame.
Optional- RF PnP Package, PL-TNC/RA
This package includes the following components-
PL-259 right angle to TNC female bulkhead, terminated to RG58C/U- 1ft
TNC male to BNC female adapter- 1
Relocation mount with hardware- 1
Optional- RJ45-STRT Relocation Package
This package includes the following components-
RJ45 relocation cable, straight, 1ft- 1
Relocation mount and mounting hardware- 1
Product Description-
Fits the following radios- FT-857, FT-857D
Special Notes: * Digirig users will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
The TPA is a two piece protective mounting platform that is secured to the radio's 4 side mounting holes. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Material- 5052 aluminum, 1/8"
Finish- powder coat, matte black
Dimensions
Length- 13.250 in
Length with MBS-1280- 18.125 in
Depth - 2.750 in
OAW- 6.750 in
Weight
TPA only- .850 lbs
TPA + radio- 5.5 lbs
TPA + radio + MBS-1280 + LiFePo4 10AH battery – 10.0 lbs
