Armoloq TPA-891B
*Base Package includes the TPA protective mounting platform only. All additional accessories, components and RF packages are sold as an optional add on or can be purchased separately under the Optional Packages and Components page.
Base package includes the following-
TPA-891B, protective mounting platform
M4-0.7 x 10mm- 4, these mounting screws are the proper length for attaching the TPA to the radio. Not to be used without the TPA pack frame. *Included in the hardware pack are 2 additional washers. In order to maintain the ability to remove the control head while the TPA is installed, you’ll need to place these 2 washers between the TPA and radio body on the VFO side. The TPA should not be installed without these 2 washers in place as they prevent lateral pressure from being applied to the control head.
Optional- RF PnP Package, PL-TNC/RA
This package includes the following components-
PL-259 right angle to TNC female bulkhead, terminated to RG58C/U, 1ft- 1
TNC male to BNC female adapter- 1
Relocation mount with hardware- 1
Product Description-
Fits the following radios- FT-891
Special Notes: *DigiRig users will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
The TPA is a two piece protective mounting platform that is secured to the radio's 4 side mounting holes. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Material- 5052 aluminum, 1/8"
Finish- powder coat, matte black
Dimensions
Length- 12.750 in
Length with MBS-1280- 17.750 in
Depth - 2.500 in
OAW- 6.750 in
Weight
TPA only- .850 lbs
TPA + radio- 5.1 lbs
TPA + radio + MBS-1280 + LiFePo4 10AH battery – 10.0 lbs
