Armoloq TPA-897
*Please note that the TPA-897 was designed to accomodate the original battery tray supplied with the radio. The TPA will not fit with the Yaesu FP-30 internal power supply due to it's size and kickstand placement. The rubber or hard plastic pads at the rear of the radio will have to be removed in order to install the TPA.
Regarding tuners- Through holes were placed on the tuner side of the TPA to allow access to the radios original mounting holes. I was not able to have either the Yaesu FC-30 or LDG AT-897 tuners on hand when working the design so fitment of either unit is not confirmed.
*Base Package only includes the items listed in the description below
* Digirig users- You will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
The TPA pack frame is a 2 piece frame that is secured to the radio via 8, side chassis mounts. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Dimensions
Length - 14.625 in
Depth - 3.875 in
Weight- 1.875 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Materials
Frame- 5052 aluminum, 1/8"
Relocation mounts- 6061 aluminum
Finish- powder coat, matte black
Base package includes the following-
TPA-897, 2 piece pack frame
M4-0.7 x 10mm socket head screws- 8, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
Optional- RF PnP Package, PL-TNC/RA
This package includes the following components-
PL-259 right angle to TNC female bulkhead, terminated to RG58C/U- 1ft
TNC male to BNC female adapter- 1
Relocation mount with hardware- 1
