Armoloq TPA-MXT575
*Base Package includes the TPA protective mounting platform only. All additional accessories, components and RF packages are sold as an optional add on or can be purchased separately under the Optional Packages and Components page.
Base package includes the following-
TPA-MXT575, protective mounting platform
M4 x 10mm- 4, these mounting screws are the proper length for attaching the TPA to the radio. Not to be used without the TPA pack frame. The TPA will have rubber pads installed, 2 per side, to prevent frame rotation once installed.
RF PnP Package, PL-TNC/STRT
This package includes the following components-
PL-259 straight to TNC female bulkhead, terminated to RG58C/U- 1ft
TNC male to BNC female adapter- 1
Relocation mount with hardware- 1
Product Description-
Fits the following radios- Midland MXT575
Special Notes:
*There are 4 chassis mounts located under the circular black plastic overs on either side of the radio body, 2 per side. These are adhesive backed covers that will be removed before installation. The already exposed single chassis mounts are not utilized with the TPA. Please refer to the above photos for a visual.
*DigiRig users will not need the Data Relocation Package if you're running the DigiRig affixed to your TPA. The suggested installation is to utilize the appropriate cabling offered from DigiRig for your radio and dress the excess cable into the open area at the rear of the TPA.
*The TPA-MXT575 is not compatible with the mobile mounting bracket included with the Midland MXT575
The TPA is a two piece protective mounting platform that is secured to the radio's 4 side mounting holes. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Material- 5052 aluminum, 1/8"
Finish- powder coat, matte black
Dimensions
Length- 8.500 in
Depth - 1.875 in
OAW-
Weight
TPA only- .680 lbs
TPA + radio-
