Armoloq TPA-7200
*Base Package only includes the items listed in the description below
*Does not include rear RF adapters or coax. RF adapters and coax can be sourced thru various online vendors.
Suggested components-
PL-259 male to BNC female, right angle adapter
RF Cable- BNC male, straight connector to BNC male, straight connector, 18in
Or-
PL-259 male to BNC female, straight adapter
RF Cable- BNC male, right angle connector to BNC male, straight connector, 18in
Or-
RF Cable- PL-259 male to BNC male, 18in
*There are no specific additional optional packages available at this time for the 7200. A USB-B Relocation Package will be available 2024.
The TPA pack frame is a 2 piece frame that is secured to the radio via 8, side chassis mounts. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Note- the rubber pads at the bottom rear of the radio will need to be removed in order to install the TPA.
Dimensions
Length - 14.000 in
Depth - 4.000 in
OAW, to include radio- 9.750 in
Weight- 2.000 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Materials
Frame- 5052 aluminum, 1/8"
Relocation mounts- 6061 aluminum
Finish- powder coat, matte black
Base package includes the following-
TPA-7200, 2 piece pack frame
M4-0.7 x 10mm socket head screws- 8, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
