Armoloq TPA-7300
Please note that there was a slight design change around the control head and grab handle area to add additional protection to that area. This change occured after the photos were taken and the radio returned to it's owner. The unit you receive will differ slightly from those in the photos. Please see the last photo for a visual.
*Base Package only includes the items listed in the description below
*Does not include rear RF adapters or coax. RF adapters and coax can be sourced thru various online vendors.
Suggested components-
PL-259 male to BNC female, right angle adapter
RF Cable- BNC male, straight connector to BNC male, straight connector, 18in
Or-
PL-259 male to BNC female, straight adapter
RF Cable- BNC male, right angle connector to BNC male, straight connector, 18in
Or-
RF Cable- PL-259 male to BNC male, 18in
*There are no specific additional optional packages available at this time for the 7300. A USB-B Relocation Package will be available 2024.
The TPA pack frame is a 2 piece frame that is secured to the radio via 8, side chassis mounts. The frame is CNC laser cut from 5052 aluminum and powder coated with a matte black finish. The TPA provides protection to the radio body and control head with a wrap around design while allowing access to all controls.
Note- the rubber pads at the bottom rear of the radio will need to be removed in order to install the TPA.
Dimensions
Length - 13.912 in
Depth - 4.125 in
OAW, to include radio- 9.700
Weight- 2.050 lbs
Relocation Mounts are 1 inch in depth and will add an additional 1-2 inches to overall depth, depending on placement.
Materials
Frame- 5052 aluminum, 1/8"
Relocation mounts- 6061 aluminum
Finish- powder coat, matte black
Base package includes the following-
TPA-7300, 2 piece pack frame
M4-0.7 x 10mm socket head screws- 8, these mounting screws are the appropriate length to avoid damaging the radio's internals. Not to be installed without TPA pack frame.
